/ultracook

Use this skill when the user wants the whole cook → press → age → cure → age → cure → age chain to run forward without per-step approval, and wants each phase to reason in fresh context — blind to the previous phase's chain-of-thought.

Do not use it for short focused changes (/cook --auto is cheaper and continuous), for fuzzy planning (/mold), or for review-only work (/age).

/ultracook is the sub-agent-transport sibling of /cook --auto. Same seven spawns, same --auto semantics propagated end-to-end, same medium+ stake floor, same two-cure-pass cap. The only difference is that each phase runs inside its own freshly-spawned sub-agent, so the parent context never accumulates phase-internal reasoning and review is adversarial rather than continuous.

Inputs

Accept one of:

• A spec path, usually .cheese/specs/<slug>.md.
• A bare slug whose spec lives under .cheese/specs/<slug>.md.
• A pasted spec, with a slug supplied alongside.

/ultracook does not accept fuzzy or open-ended asks — those go to /mold first. The orchestrator assumes the contract is already locked.

Flow

1. Resolve slug — derive <slug> from the input. If a spec path is given, the slug is the basename without .md; if a bare slug is given, confirm the spec exists at .cheese/specs/<slug>.md.
2. Guard against re-entry — if any of .cheese/{cook,press,age,cure}/<slug>.md already exist, stop with a one-line list of the existing handoffs and tell the user to either run /cheese --continue <slug> to resume from the latest phase or rm the relevant files to start fresh. Never silently wipe.
3. Phase loop — for each phase in cook, press, age, cure, age, cure, age, spawn a fresh sub-agent (see ## Sub-agent contract below), wait for it to return, read .cheese/<phase>/<slug>.md, and decide:
   • status: starts with halt → surface the halt reason and stop.
   • next: is done and the phase is age → stop early with a clean summary (the diff is clean at the medium+ floor; cure has nothing to apply).
   • Otherwise → continue to the next phase.
4. Final summary — after the third age spawn (or any earlier stop), print a four-line summary: passes completed, total findings applied / deferred, the final age-report path, and the next-step nudge ("review the diff, then /gh when ready").

/ultracook never invokes /gh. PR creation stays user-triggered.

Phases and slug paths

The chain is fixed: seven spawns. The orchestrator walks the table top-to-bottom and stops after the last entry.

Every spawn uses the canonical /<phase> <slug> --auto form. Cook accepts a bare slug per its Inputs section; the other phases already resolve their paths from the slug.

#	Phase invocation	Handoff slug
1	/cook <slug> --auto	.cheese/cook/<slug>.md
2	/press <slug> --auto	.cheese/press/<slug>.md
3	/age <slug> --auto	.cheese/age/<slug>.md
4	/cure <slug> --auto --stake medium+	.cheese/cure/<slug>.md
5	/age <slug> --auto	.cheese/age/<slug>.md (overwritten)
6	/cure <slug> --auto --stake medium+	.cheese/cure/<slug>.md (overwritten)
7	/age <slug> --auto	.cheese/age/<slug>.md (final report)

Cap enforcement

The two-cure-pass cap is enforced by chain length, not by age. Each age sub-agent boots in fresh context and cannot count prior cure passes, so the contract cannot rely on age tracking the count. Instead:

• The chain table has exactly seven entries, with two cure spawns (#4 and #6) and three age spawns (#3, #5, #7). After spawn #7 completes, the orchestrator stops because the table is exhausted.
• Each age spawn writes next: from what it observes on its own run: next: cure when at least one medium-or-above finding exists, next: done when none do. The field is informational under ultracook — it drives early-stop (when an age reports clean), but it does not gate cap enforcement.
• /ultracook does not pass a pass-ordinal hint to age. Age has no need to know whether it is age₁, age₂, or age₃; the orchestrator owns the position.

No-chain isolation directive

Each phase's existing --auto contract chains forward in-session — /cook --auto invokes /press --auto, which invokes /age --auto, etc. /ultracook overrides that behaviour: every spawn must run only its own phase, write the slug, and stop. The orchestrator owns the chain.

The override travels in the spawn prompt as the explicit no-chain directive: Do not chain forward to the next phase even though your auto-mode contract documents that. Write your handoff slug and stop. The /ultracook orchestrator is driving the chain.

Each phase's SKILL.md ## Auto mode section honours this directive — see skills/<phase>/SKILL.md ### When invoked from /ultracook for the per-phase contract amendment. Without the directive, sub-agent #1 would run the entire pipeline inside its own context and the per-phase fresh-context property would not be delivered.

Sub-agent contract — inheritance, not diminution

Each phase spawns a full peer sub-agent — same model as the parent, full tool access, full MCP access, full skill access. These are not focused mini-assistants:

• /cook writes code across the changed files.
• /press runs the project's test suite and adds tests.
• /age reviews nine dimensions over the diff.
• /cure applies fixes via cheez-write and re-runs test gates.

Diminutive defaults (haiku model, restricted tools, Explore-style read-only workers) will choke phases that need to edit dozens of files or run real test suites.

Concrete Agent() signature shape (harness-agnostic; adapt the keyword names to the host):

Agent(
  subagent_type: "general-purpose",   # never specialised
  # model: omit — inherits parent's model. Do not pass haiku/sonnet here.
  prompt: "Run /<phase> <slug> --auto for THIS PHASE ONLY. Write
           .cheese/<phase>/<slug>.md with the handoff schema and stop.
           Do not chain forward to the next phase even though your
           auto-mode contract documents that. The /ultracook orchestrator
           is driving the chain."
)

The sub-agent's stdout is operator-visible but not the chaining contract. The orchestrator must read .cheese/<phase>/<slug>.md to decide what happens next; never infer success or next: from the sub-agent's last line. Asking the sub-agent to echo its status to stdout would tempt a future maintainer to wire stdout-driven chaining back in.

Rules:

• Do not downgrade the model. Omit the model parameter so the sub-agent inherits the parent's model. Never pass a smaller tier (haiku, lighter task workers) for ultracook phases.
• Do not narrow subagent_type. Use general-purpose (or the harness equivalent that grants full tool access). Do not pass Explore, lsp-probe, or any other read-only / scoped worker type.
• Do not restrict tools or MCP access. Each phase needs Bash, Edit, Write, Read, the cheez-* skills, and any MCP servers the parent has. Restricting them is the failure mode the contract exists to prevent.
• Do pass the slug. The phase skill resolves its own paths from the slug; /ultracook does not pre-compute paths for the sub-agent.

The contract is "inheritance, not diminution" because most sub-agent patterns in this ecosystem (Explore, lsp-probe, whey-drainer, ricotta-reducer) are deliberately scoped down for cheap focused queries. /ultracook does the opposite: it spawns workers that are full peers of the parent, doing major work in their own context window.

Handoff slug schema

Every phase writes its handoff slug to .cheese/<phase>/<slug>.md with the following minimum shape (prepended as frontmatter or inline at the top of richer reports such as age and press):

status: ok | halt: <one-line reason>
next: <phase-name | done>
artifact: <path-to-richer-report-if-any>
<one-line orientation: what this phase did>

status: ok means the phase finished cleanly and next names the next phase the chain would run if the orchestrator chose to continue. status: halt: <reason> means the chain stops; /ultracook surfaces the reason verbatim. next: done is informational: an age phase writes it when the diff is clean at the medium+ floor (early-stop signal). The two-cure-pass cap is enforced by chain length, not by next: done — see ### Cap enforcement above.

For phases that already write rich reports (/age, /press, /cure once extended, /cook once extended), the slug schema is prepended at the top of the same file — there is no second file. The schema is the contract; the body is whatever the phase normally writes.

When auto mode stops early

/ultracook stops and surfaces the report when:

• A phase's slug file is missing after the sub-agent returns (the sub-agent did not write its handoff — print "phase did not write handoff — check sub-agent logs").
• A phase writes status: halt: <reason> (a quality gate failed, press came back blocked, cure could not apply any finding).
• An age phase writes next: done because the diff is clean at the medium+ floor (early-stop). Note: this only fires from age spawns; cure always writes next: age and cap-enforcement does not flow through next: done (the chain length handles that — see ### Cap enforcement above).

In every early-stop case, surface the slug file path so the user can read the full report. The natural terminal case (chain table exhausted after spawn #7) does not need an explicit early-stop signal — the orchestrator simply runs out of entries to spawn.

Existing handoffs

If any of .cheese/{cook,press,age,cure}/<slug>.md already exist when /ultracook <slug> is invoked, stop. Do not silently wipe — the user may be mid-pipeline. Scan all four phase paths and print only the ones that exist:

Slug `<slug>` has existing handoffs:
  .cheese/cook/<slug>.md     (when present)
  .cheese/press/<slug>.md    (when present)
  .cheese/age/<slug>.md      (when present)
  .cheese/cure/<slug>.md     (when present)
Use `/cheese --continue <slug>` to resume from the latest phase, or
`rm` the listed files to start fresh.

Removing the handoffs by hand is the only sanctioned reset path. The orchestrator does not accept a wipe flag — adding one would create a destructive default for what is intentionally a one-line rm.

Output

A short final summary, after the chain stops (success or early stop):

Ultracook summary — <slug>
Passes completed: <list of phase names that ran>
Findings:         <fixed count> applied, <count> deferred (cure-report path)
Final age:        .cheese/age/<slug>.md
Next step:        review the diff, then /gh when ready

If the chain stopped on a halt, replace "Next step" with the halt reason and the path of the phase that surfaced it.

Preferred tools and fallbacks

/ultracook is a thin orchestrator — it spawns sub-agents and reads the small handoff slug files they write. The preferred tools live inside each phase, not here. The orchestrator only needs:

Need	Prefer	Fallback
Spawning the per-phase worker	Agent() / harness sub-agent primitive	none — without sub-agent spawn, the fresh-context property cannot be honoured
Reading the handoff slug	cheez-read / host file read	host file read
Detecting existing handoffs	host file glob / list	cheez-search tilth_files glob

If the host harness does not expose a sub-agent primitive at all, /ultracook is the wrong skill — recommend /cook --auto instead, which uses the same flag semantics in the parent's own context.

Rules

• Sub-agents are full peers, not diminutive workers. Do not downgrade the model, do not narrow subagent_type, do not restrict tools or MCP access.
• The chain is fixed: cook → press → age → cure → age → cure → age, all --auto, cure stake floor medium+. Do not invent extra phases or skip phases.
• Read each phase's handoff slug after the sub-agent returns. Do not infer success from the sub-agent's last line — read the file.
• Surface halts verbatim. Do not paraphrase, do not soften, do not "retry" a halted phase silently.
• Never invoke /gh. PR creation stays user-triggered.
• Never wipe existing handoffs. Stop and tell the user to use /cheese --continue or rm by hand.
• Apply the shared voice kernel (lives at skills/age/references/voice.md in this repo): lead the final summary with what happened, flag residual risk as certain | speculating | don't know, do not manufacture follow-ups.